Dropout, Steel, SRAM UDH Round Rear, Eccentric, 1-3/4" OD x .985" Flange bundle Angle of the stay tabs

Angle of the stay tabs are 44 degrees

Made in Birmingham

Length: Center of the axle to the center of the derailleur hanger = 1

Spacing: 74

Due to dropout geometry

Dropout, Steel, SRAM UDH Round Rear, Eccentric, 1-3/4" OD x .985" Flange bundle Angle of the stay tabsMaterial: 1018 steel, includes right and left frame components Application: SRAM Full Mount derailleurs and Universal Derailleur Hanger Meets all SRAM specs OD: 1 3 4" Flanges: Width: 0. 985" Symmetric: Side to side chainstay and seatstay Place the stays outboard as far as possible to avoid SRAM's clearance mask Wheel Alignment: Concentric: use a 0 mm offset bushing Eccentric: Select a 0. 5 or 1. 0 mm offset bushing For 0. 5 or 1. 0 mm bushings use a