80A Explosion Proof Fused Disconnect - 600V Rated - Time Delay Fuse - (3) 80A Fuses - (2) NPT Hubs - IEC EX / ATEX Rated $500 - $1000 Limited Warranty 3 Year Backup/Run

Limited Warranty 3 Year Backup/Run Time (Full Load) 4 Minute Typical Battery Recharge Time 3 Hour Receptacle Type NEMA L6-30R NEMA L6-20R Receptacle Detail 1 x NEMA L6-30R 2 x NEMA L6-20R Weight (Approximate) 31

Remote Installation: The outer rubber cover of the remote can be removed so that the rear mounting plate can be attached to a mounting surface via four (4) screws

26 in/660mm Depth) - 19" (482

Class 2 Division 1 & 2 paint spray booth explosion proof light fixture provides 23

your project won't be water proof but there is access to each 5060 LED and each strip length can be easily modified

80A Explosion Proof Fused Disconnect - 600V Rated - Time Delay Fuse - (3) 80A Fuses - (2) NPT Hubs - IEC EX / ATEX Rated $500 - $1000 Limited Warranty 3 Year Backup/RunSpecifications Additional Information EPFDS AEC 80A 3P 3X80A. 600V TD Explosion Proof Disconnect Switch Breaker Features Ratings Unit Type: Explosion Proof Fused Disconnect Class I, Divisions 1 & 2 Groups B,C,D Dimensions: 12" x 18" x 8" Class I, Zones 1 & 2 Groups llB+ H2,IIA Weight: 130 lb Class II Divisions 1 & 2 Groups E,F,G Rated Voltage: 600 V AC Class III Configuration: 3 Pole NEMA 3,4,4X,7(B,C,D),9(E,F,G) Amps: 80 A (Maximum) CENELEC ATEX IEC