Rubber 101.6mm Vacuum Chamber Cap for V.I.C. 12 Wax Burs The tapered interior machining of

The tapered interior machining of the spindle matches the taper of the motor shaft

Outside Dimension: 4"W x 5

Create texture and refine contours on your flat and curved hollowware and jewelry designs with this Picard embossing hammer

it performs exceptionally well when you need to bend the wire around corners and along curves

leaving a matte white band around the circumference of the bead

Rubber 101.6mm Vacuum Chamber Cap for V.I.C. 12 Wax Burs The tapered interior machining ofThis rubber cap seals the 4" opening at the bottom of the vacuum chamber in the V. I. C. 12 casting machine. It must be removed in order to perform regular maintenance on the chamber. Periodically (and always after a flask blowout), clean the accumulated investment and metal from the bottom of the vacuum chamber. To access the chamber, remove the adjustable clamp band from the black rubber cap. In the cap or immediately inside the vacuum chamber, is a